Handbook for Concrete and Cement | ||
|
|
Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations. Find CRD-C methods and specifications direct links from the following table using Ctrl + F: | |
|
| ||
| CRD-C | 1-93 | ACI Standard Practice for Selecting Proportions for Structural Lightweight Concrete (ACI 211.2-91) |
| 2-93 | ACI Standard Practice for Selecting Proportions for No-Slump Concrete (ACI 211.3-75) (Revised 1987) (Reapproved 1992) | |
| 3-94 | Standard Test Method for Temperature of Freshly Mixed Concrete (ASTM C 1064-86 (Reapproved 1993)). | |
| 4-91 | Standard Practice for Sampling Freshly Mixed Concrete (ASTM C 172-90) | |
| 5-92 | Standard Test Method for Slump of Hydraulic Cement Concrete (ASTM C 143-90a) | |
| 6-74 | Method of Test for Remolding Effort of Freshly Mixed Concrete | |
| 7-94 | Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete (ASTM C 138-92) | |
| 8-96 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method (ASTM C 173-94) | |
| 9-93 | Standard Test Methods for Bleeding of Concrete (ASTM C 232-92) | |
| 10-97 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory (ASTM C 192/192M-95) | |
| 11-97 | Standard Practice for Making and Curing Concrete Test Specimens in the Field (ASTM C 31/31M-95) | |
| 12-97 | Standard Test Method for Air-Entraining Admixtures for Concrete (ASTM C 233-95) | |
| 13-97 | Standard Specification for Air-Entraining Admixtures for Concrete (ASTM C 260-95) | |
| 14-96 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (ASTM C 39-94) | |
| 15-92 | Standard Test Method for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (ASTM C 116-90) | |
| 16-94 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (ASTM C 78-94) | |
| 17-94 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (ASTM C 293-94) | |
| 18-93 | Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens (ASTM C 215- 91) | |
| 19-94 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression (ASTM C 469-94) | |
| 20-94 | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (ASTM C 666-92) | |
| 21- | Withdrawn | |
| 22-96 | Standard Test Method for Rebound Number of Hardened Concrete (ASTM C 805-94) | |
| 23-91 | Standard Test Method for Specific Gravity, Absorption, and Voids in Hardened Concrete (ASTM C 642-90) | |
| 24-01 | Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel | |
| 25-94 | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete (ASTM C 157-93) | |
| 26-96 | Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete (ASTM C 42-94) | |
| 27-96 | Standard Test Method for Measuring Length of Drilled Concrete Cores (ASTM C 174-87 (Reapproved 1991)) | |
| 28-93 | Standard Practice for Capping Cylindrical Concrete Specimens (ASTM C 617-94) | |
| 29-94 | Standard Practice for Examination and Sampling of Hardened Concrete in Constructions (ASTM C 823-95) | |
| 30-87 | Standard Test Method for Cement Content of Hardened Portland Cement Concrete (ASTM C 85-66 (Reapproved 1973)) | |
| 31-97 | Standard Specification for Ready-Mixed Concrete (ASTM C 94-96) | |
| 32-84 | Standard Test Method for Flow Under Water of Hydraulic-Cement Concrete | |
| 33-96 | Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete (ASTM C 878-95a) | |
| 34-48 | Withdrawn | |
| 35-59 | Withdrawn | |
| 36-73 | Method of Test for Thermal Diffusivity of Concrete | |
| 37-73 | Method of Test for Thermal Diffusivity of Mass Concrete | |
| 38-73 | Method of Test for Temperature Rise in Concrete | |
| 39-81 | Test Method for Coefficient of Linear Thermal Expansion of Concrete | |
| 40-94 | Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing (ASTM C 671-94) | |
| 41-93 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method (ASTM C 231-916) | |
| 42-92 | Standard Practice for Microscopical Determination of Air-Void Content and Parameters of the Air-Void System in Hardened Concrete (ASTM C 457-90) | |
| 43-96 | Standard Terminology Relating to Concrete and Concrete Aggregates (ASTM C 125-94Ñ) | |
| 44-63 | Method for Calculation of Thermal Conductivity of Concrete | |
| 45-65 | Method of Test for Thermal Conductivity of Lightweight Insulating Concrete | |
| 46-94 | Standard Test Method for Ball Penetration in Fresh Portland Cement Concrete (ASTM C 360-92) | |
| 47-94 | Standard Method of Test for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (ASTM C 672-92) | |
| 48-92 | Standard Test Method for Water Permeability of Concrete | |
| 49-74 | Supplementary Standard Methods of Making and Curing Concrete Test Specimens in the Laboratory | |
| 50-69 | Method of Test for Effect of Grinding During Concrete Mixing on the Grading of Aggregates | |
| 51-93 | Standard Method of Test for Pulse Velocity Through Concrete (ASTM C 597-83 Reapproved 1991) | |
| 52-97 | Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method (ASTM C 944-95) | |
| 53-01 | Test Method for Consistency of No-Slump Concrete Using the Modified Vebe Apparatus | |
| 54-94 | Standard Test Method for Creep of Concrete in Compression (ASTM C 512-87 (Reapproved 1994)) | |
| 55-92 | Test Method for Within-Batch Uniformity of Freshly Mixed Concrete | |
| 56-94 | Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM C 490-93a) | |
| 57-97 | Standard Practice for Petrographic Examination of Hardened Concrete (ASTM C 856-95) | |
| 58-92 | Standard Test Method for Abrasion Resistance of Concrete by Sandblasting (ASTM C 418-90) | |
| 59-91 | Standard Test Method for Penetration Resistance of Hardened Concrete (ASTM C 803-90) | |
| 60-97 | Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces (ASTM C 779-95) | |
| 61-89A | Test Method for Determining the Resistance of Freshly Mixed Concrete to Washing Out in Water | |
| 62-69 | Method of Testing Cylindrical Test Specimens for Planeness and Parallelism of Ends and Perpendicularity of Sides | |
| 63-91 | Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) (ASTM C 1138-89) | |
| 64-94 | Standard Test Methods for Density of Unhardened and Hardened Concrete In Place by Nuclear Methods (ASTM C 1040-93) | |
| 65-94 | Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (ASTM C 1018-94b) | |
| 66-94 | Standard Test Method for Compressive Strength of Concrete Cylinders Cast In Place in Cylindrical Molds (ASTM C 873-94) | |
| 67-94 | Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone (ASTM C 995-94) | |
| 68-96 | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures (ASTM C 827-95a) | |
| 69-91 | Standard Test Method for Length Change of Drilled or Sawed Specimens of Hydraulic Cement Mortar and Concrete (ASTM C 341-89) | |
| 70-96 | Standard Practice for Estimating Concrete Strength by the Maturity Method (ASTM C 1074-93) | |
| 71-80 | Standard Test Method for Ultimate Tensile Strain Capacity of Concrete | |
| 72-01 | Standard Test Methods for Determining the Cement Content of Freshly Mixed Concrete | |
| 73-96 | Standard Test Method for Drying Shrinkage of Concrete Block (ASTM C 426-70 (Reapproved 1993)) | |
| 74-97 | Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete (ASTM C 387-95) | |
| 75-92 | Standard Test Method for Unit Weight of Structural Lightweight Concrete (ASTM C 567-91) | |
| 76-89 | Standard Method of Test for Moisture Condition of Hardened Concrete by-the Relative Humidity Method (ASTM C 427-64) | |
| 77-97 | Standard Test Method for Splitting Tensile Strength of Cylin-drical Concrete Specimens (ASTM C 496-96) | |
| 78-96 | Standard Test Method for Pullout Strength of Hardened Concrete (ASTM C 900-94) | |
| 79-94 | Standard Specification for Pigments for Integrally Colored Concrete (ASTM C 979-82 (Reapproved 1993)) | |
| 80-93 | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs (ASTM C 928-92a) | |
| 81-93 | Standard Specification for Foaming Agents Used in Making Pre-formed Foam for Cellular Concrete (ASTM C 869-91) | |
| 82-01 | Standard Test Methods for Determining the Water Content of Freshly Mixed Concrete | |
| 83- | Withdrawn | |
| 84-92 | Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate in the Laboratory (ASTM C 943-80 (Reapproved 1990)) | |
| 85-93 | Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete (ASTM C 1084-92) | |
| 86-96 | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance (ASTM C 403M-95) | |
| 87-93 | Standard Specification for Chemical Admixtures for Concrete (ASTM C 494-92) | |
| 88-93 | Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (ASTM C 1017-92) | |
| 89-64 | Method of Test for Longitudinal Shear Strength, Unconfined, Single Plane | |
| 90-73 | Method of Test for Transverse Shear Strength, Confined, Single Plane or Double Plane | |
| 91-93 | Standard Test Method for Compressive Strength of Lightweight Insulating Concrete (ASTM C 495-91a) | |
| 92-97 | Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength (ASTM C 513-89(95)) | |
| 93-93 | Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads (ASTM C 801-91 | |
| 94-66 | Corps of Engineers Specification for Surface Retarders | |
| 95-94 | Standard Test Method for Developing Early-Age Compression Test Values and Projecting Later-Age Strengths (ASTM C 918-93) | |
| 96-94 | Standard Specification for Molds for Forming Concrete Test Cylinders Vertically (ASTM C 470-94 | |
| 97-96 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (ASTM C 684-95) | |
| 98-97 | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing (ASTM C 685-95a) | |
| 99-89 | Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete (ACI 211.1-91) | |
| 100-75 | Method of Sampling Concrete Aggregate and Aggregate Sources, and Selection of Material for Testing | |
| 101- | Withdrawn | |
| 102-96 | Standard Specification for Wire-Cloth Sieves for Testing Purposes (ASTM E 11-95) | |
| 103-96 | Standard Method for Sieve Analysis of Fine and Coarse Aggregates (ASTM C 136-95a) | |
| 104-80 | Method of Calculation of the Fineness Modulus of Aggregate | |
| 105-96 | Standard Test Method for Materials Finer than 75-m (No. 200) Sieve in Mineral Aggregates by Washing (ASTM C 117-95) | |
| 106-93 | Standard Test Method for Unit Weight and Voids in Aggregate (ASTM C 29/C 29M-91a) | |
| 107-94 | Standard Test Method for Specific Gravity, and Absorption of Coarse Aggregate (ASTM C 127-88 (Reapproved 1993)) | |
| 108-94 | Standard Test Method for Specific Gravity and Absorption of Fine Aggregate (ASTM C 128-93) | |
| 109- | Withdrawn | |
| 110- | Withdrawn | |
| 111-96 | Standard Test Method for Surface Moisture in Fine Aggregate (ASTM C 70-94) | |
| 112-69 | Method of Test for Surface Moisture in Aggregate by Water Displacement | |
| 113-97 | Standard Test Method for Total Moisture Content of Aggregate by Drying (ASTM C 566-96) | |
| 114-97 | Test Method for Soundness of Aggregates by Freezing and Thawing of Concrete Specimens | |
| 115-94 | Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures (ASTM C 682-94) | |
| 116-97 | Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar (ASTM C 87-83 (Reapproved 1995) ) | |
| 117-91 | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (ASTM C 131-89) | |
| 118-94 | Standard Practice for Reducing Field Samples of Aggregate to Testing Size (ASTM C 702-93) | |
| 119-91 | Standard Method of Test for Flat or Elongated Particles in Coarse Aggregate (ASTM D 4791-89) | |
| 120-94 | Test Method for Flat and Elongated Particles in Fine Aggregate | |
| 121-94 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete (ASTM C 40-94) | |
| 122-96 | Standard Test Method for Lightweight Pieces in Aggregate (ASTM C 123-94) | |
| 123-92 | Standard Test Method for Potential Alkali
Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method) (ASTM
C
227-90) | |
| 124-73 | Method of Test for Specific Heat of Aggregates, Concrete, and Other Materials (Method of Mixtures) | |
| 125-63 | Method of Test for Coefficient of Linear Thermal Expansion of Coarse Aggregate (Strain-Gage Method) | |
| 126-63 | Method of Test for Coefficient of Thermal Expansion of Mortar | |
| 127-92 | Standard Practice for Petrographic Examination of Aggregates for Concrete (ASTM C 295-90) | |
| 128-94 | Standard Test Method for Potential Reactivity of Aggregates (Chemical Method) (ASTM C 289-94) | |
| 129-96 | Standard Test Method for Index of Aggregate Particle Shape and Texture (ASTM D 3398-93) | |
| 130-01 | Standard Recommended Practice for Estimating Scratch Hardness of Coarse Aggregate Particles | |
| 131-97 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction (ASTM C 1105-95) | |
| 132-92 | Standard Test Method for Staining Materials in Lightweight Concrete Aggregates (ASTM C 641-82 (Reapproved 1991)) | |
| 133-94 | Standard Specification for Concrete Aggregates (ASTM C 33-93) | |
| 134-91 | Standard Specification for Lightweight Aggregates for Structural Concrete (ASTM C 330-89) | |
| 135-94 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units (ASTM C 331-94) | |
| 136-93 | Standard Specification for Lightweight Aggregates for Insulating Concrete (ASTM C 332-87 (Reapproved 1991)) | |
| 137-92 | Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate (ASTM C 88-90) | |
| 138-97 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster (ASTM C 35-95) | |
| 139-92 | Standard Descriptive Nomenclature of Constituents of Natural Mineral Aggregates (ASTM C 294-86 (Reapproved 1991) | |
| 140-91 | Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations (ASTM C 342-90) | |
| 141-96 | Standard Test Method for Degradation of Fine Aggregate Due to Attrition (ASTM C 137-90) | |
| 142-91 | Standard Test Method for Clay Lumps and Friable Particles in Aggregates (ASTM C 142-78 (Reapproved 1990)) | |
| 143-62 | Specifications for Meters for Automatic Indication of Moisture in Fine Aggregates | |
| 144-92 | Standard Test Method for Resistance of Rock to Freezing and Thawing | |
| 145-91 | Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (ASTM C 535-89) | |
| 146-93 | Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method) (ASTM C 586-92) | |
| 147- | Withdrawn | |
| 148-69 | Method of Testing Stone for Expansive Breakdown on Soaking in Ethylene Glycol | |
| 149- | Withdrawn | |
| 150- | Withdrawn | |
| 151- | Withdrawn | |
| 152-92 | Standard Specification for Aggregates for Radiation-Shielding Concrete (ASTM C 637-90) | |
| 153-93 | Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation- Shielding Concrete (ASTM C 638-92) | |
| 154-77 | Standard Test Method for Determination of Moisture in Fine Aggregate for Concrete by Means of a Calcium-Carbide Gas Pressure Meter | |
| 155-94 | Standard Practice for Sampling Aggregate (ASTM D 75-87 (Reapproved 1992) ) | |
| 156-96 | Standard Specification for Standard Sand (ASTM C 778-92) | |
| 157-96 | Standard Practice for Evaluation of Rock to be Used for Erosion Control (ASTM D 4992-94) | |
| 158-93 | Standard Practice for Calculating Thermal Diffusivity of Rocks (ASTM D 4612-86 (Reapproved 1990) | |
| 159-93 | Standard Test Method for Specific Heat of Rock and Soil (ASTM D 4611-86) | |
| 160-94 | Standard Practice for Making Roller-Compacted Concrete Specimens in Cylinder Molds Using a Vibrating Table (ASTM C 1176-92) | |
| 161-92 | Standard Practice for Selecting Proportions for Roller-Compacted Concrete (RCC) Pavement Mixtures Using Soil Compaction Concepts | |
| 162-93 | Standard Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft (2,700 kN-m/m )) (ASTM D 1557-91) | |
| 163-92 | Test Method for Water Permeability of Concrete Using Triaxial Cell | |
| 164-92 | Standard Test Method for Direct Tensile Strength of Cylindrical Concrete or Mortar Specimens | |
| 165-92 | Standard Practice for Preparation of Rock Slabs for Durability Testing (ASTM: D 5121-90) | |
| 166-92 | Standard Test Method for Static Modulus of Elasticity of Concrete in Tension | |
| 167- | Withdrawn | |
| 168- | Withdrawn | |
| 169-97 | Standard Test Method for Resistance of Rock to Wetting and Drying | |
| 170-94 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) (ASTM C 1252-93) | |
| 171-94 | Standard Test Method for Determining Percentage of Crushed Particles in Aggregate | |
| 172-96 | Standard Practice for Random Sampling of Construction Materials (ASTM D 3665-82 (Reapproved 1992)) | |
| 173-94 | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders (ASTM C 1231-93) | |
| 174-94 | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method (ASTM C 1260-94)) | |
| 175-96 | Standard Test Method for Concrete Aggregates by Determination of Length Change of Concrete Due to Alkali-Silica Reation (ASTM C1293-95) | |
| 200- | Withdrawn | |
| 201-97 | Standard Specification for Portland Cement (ASTM C 150-95a) | |
| 202-97 | Standard Specification for Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes (ASTM C 511-95a) | |
| 203-96 | Standard Specification for Blended Hydraulic Cements [Metric] (ASTM C 595-95a) | |
| 204-97 | Standard Specification for Expansive Hydraulic Cement (ASTM C 845-96 ) | |
| 205-97 | Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars (ASTM C 989-95) | |
| 206-92 | Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali (ASTM C 1073-91) | |
| 207-97 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement (ASTM C 183-95a) | |
| 208-97 | Standard Terminology Relating to Hydraulic Cement (ASTM C 219- 95a) | |
| 209-96 | Standard Test Methods for Chemical Analysis of Hydraulic Cement (ASTM C 114-94) | |
| 210-94 | Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (ASTM C 305-94) | |
| 211-97 | Standard Test Method for Length Change of -Hydraulic-Cement Mortars Exposed to a Sulfate Solution (ASTM C 1012-95a) | |
| 212-97 | Standard Test Method for Fineness of Hydraulic Cement by the 45-m (No. 325) Sieve (ASTM C 430-95) | |
| 213-92 | Test Method for the Presence of Sugar in Cement, Mortar, Concrete, or Aggregates | |
| 214-97 | Standard Test Method for Fineness of Portland Cement by the Turbidimeter (ASTM C 115-96) | |
| 215- | Withdrawn | |
| 216-97 | Standard Test Method for Fineness of Hydraulic Cement by the 150-m (No. 100) and 75-m (No. 200) Sieves (ASTM C 184-94) | |
| 217-96 | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-m (No. 50), 150-m (No. 100) and 75-m (No. 200) Sieves by Wet Methods (ASTM C 786-94) | |
| 218-97 | Standard Test Method for Fineness of Portland Cement by Air Permeability Apparatus (ASTM C 204-96) | |
| 219-96 | Standard Test Method for Air Content of Hydraulic Cement Mortar (ASTM C 185-95) | |
| 220-93 | Standard Test Method for Normal Consistency of Hydraulic Cement (ASTM C 187-86 (Reapproved 1991)) | |
| 221- | Withdrawn | |
| 222-94 | Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle (ASTM C 191-92) | |
| 223-97 | Standard Test Method for Time-of Setting of Hydraulic-Cement Paste by Gillmore Needles (ASTM C 266-89(95)) | |
| 224-94 | Standard Test Method for Autoclave Expansion of Portland Cement (ASTM C 151-93a) | |
| 225-97 | Standard Test Method for Restrained Expansion of Expansive Cement Mortar (ASTM C 806-95) | |
| 226-91 | Standard Specification for Flow Table for Use in Tests of Hydraulic Cement (ASTM C 230-90) | |
| 227-96 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or 50-mm Cube Specimens) (ASTM C 109/109M-95) | |
| 228-97 | Standard Test Method for Density of Hydraulic Cement (ASTM C 188-95) | |
| 229-97 | Standard Test Method for Heat of Hydration of Hydraulic Cement (ASTM C 186-95) | |
| 230-97 | Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle (ASTM C 807-89(95)) | |
| 231-63 | Method of Test for Volume Changes in Neat Cement Bars | |
| 232-96 | Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate (ASTM C 452-95) | |
| 233- | Withdrawn | |
| 234- | Withdrawn | |
| 235-96a | Standard Specification for Reference Masses and Devices for Determining Mass for Use in the Physical Testing of Hydraulic Cements (ASTM C 1005-96) | |
| 236-96 | Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements (ASTM C 465-95) | |
| 237-94 | Standard Test Method for Time of Setting of Portland-Cement Pastes Containing Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles (ASTM C 1102-94) | |
| 238-96 | Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance (ASTM C 1117-89 (Reapproved 1994)) | |
| 239- | Withdrawn | |
| 240- | Withdrawn | |
| 241-96 | Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Portland Cement (ASTM C 226-95) | |
| 242- | Withdrawn | |
| 243- | Withdrawn | |
| 244- | Withdrawn | |
| 245-97 | Standard Test Method for Bleeding of Cement Pastes and Mortars (ASTM C 243-95) | |
| 246- | Withdrawn | |
| 247- | Withdrawn | |
| 248- | Withdrawn | |
| 249- | Withdrawn | |
| 250- | Withdrawn | |
| 251- | Withdrawn | |
| 252- | Withdrawn | |
| 253-92 | Standard Test Method for Calcium Sulfate in Hydrated Portland Cement Mortar (ASTM C 265-91) | |
| 254-91 | Standard Test Method for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings (ASTM C 267-82 (Reapproved 1990)) | |
| 255-97 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete (ASTM C 618-96) | |
| 256-97 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland Cement Concrete (ASTM C 311-96a) | |
| 257-91 | Standard Test Method for Effectiveness of Mineral Admixtures or Ground Blast- Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali- Silica Reaction (ASTM C 441-89) | |
| 258- | Withdrawn | |
| 259-97 | Standard Method of Test for Early Stiffening of Portland Cement (Paste Method) (ASTM C 451-95) | |
| 260-01 | Standard Test Method for Tensile Strength of Hydraulic Cement Mortars | |
| 261-76 | Method of Test to Determine Whether Portland Cement is Contaminated with Fly Ash | |
| 262- | Withdrawn | |
| 263- | Withdrawn | |
| 264-96 | Standard Test Method for Average Particle Size of Powders of Standard Test Method for Average Particle Size of Powders of Refractory Metals and Their Compounds by the Fisher Sub-Sieve Sizer (ASTM B 330-88 (Reapproved 1993)) | |
| 265- | Withdrawn | |
| 266- | Withdrawn | |
| 267-91 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete (ASTM C 1152-90) | |
| 268-93 | Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption (ASTM C 1069-86 (Reapproved 1992)) | |
| 269-93a | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete (ASTM C 1218-92 | |
| 270-97 | Standard Specification for Silica Fume for Use in Hydraulic-Cement Concrete and Mortar (ASTM C 1240-95a) | |
| 271-96 | Standard Performance Specification for Blended Hydraulic Cement (ASTM C 1157M-95) | |
| 272-97 | Standard Test Method for Expansion of Portland Cement Mortar Bars Stored in Water (ASTM C 1038-95) | |
| 300-90 | Corps of Engineers Specifications for Membrane-Forming Compounds for Curing Concrete | |
| 301-67 | Methods for Sampling, Packaging, Marking, and Delivery of Membrane-Forming Compounds for Curing Concrete | |
| 302-79 | Test Method for Sprayability and Unit Moisture Loss Through the Membrane Formed by a Concrete Curing Compound | |
| 303-96 | Standard Test Method for Flash Point by Tag Closed Tester (ASTM D 56-93) | |
| 304-97 | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete (ASTM C 309-95) | |
| 305-93 | Standard Test Method-for Density of Paint, Varnish, Lacquer, and Related Products (ASTM D 1475-90) | |
| 306-96 | Standard Test Method for Water Retention by Concrete Curing Materials (ASTM C 156-95) | |
| 307-91 | Method for Calculation of Amount of Ice Needed to Produce Mixed Concrete of a Specified Temperature | |
| 308-96 | Standard Test Methods for Flash Point by Pensky-Martens Closed Tester (ASTM D 93-94) | |
| 309-96 | Standard Test Method for Measuring Humidity with a Psychrometer (The Measurement of Wet- and Dry-Bulb Temperatures) (ASTM E 337-84 (Reapproved 1990)) | |
| 310-97 | Standard Specification for Sheet Materials for Curing Concrete (ASTM C 171-95) | |
| 311-69 | Method of Test for Drying Time and Reflectance by the Membrane Formed by a Concrete Curing Compound | |
| 312- | Withdrawn | |
| 313- | Withdrawn | |
| 314- | Withdrawn | |
| 315- | Withdrawn | |
| 316-79 | Federal Specification, Thinner, Paint, Mineral Spirits, Regular and Odorless (TT-T-291F w/Int Amdt-1) | |
| 317- | Withdrawn | |
| 318-79 | Federal Specifications (for) Cloth, Burlap, Jute (or Kenaf) (CCC-C-467c) | |
| 319-96 | Standard Test Methods for Nonvolatile Content of Varnishes (ASTM D 1644-88 (Reapproved 1993) | |
| 320-96 | Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (ASTM C 1151-91)) | |
| 321-97 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing (ASTM C 1315-95) | |
| 400-63 | Requirements for Water for Use in Mixing or Curing Concrete | |
| 401-75 | Method of Test for the Staining Properties of Water | |
| 402-91 | Standard Test Methods for Iron in Water (ASTM D 1068-90) | |
| 403-71 | Method of Test for Determination of Sulfate Ion in Soils and Water | |
| 404-96 | Standard Test Methods for Chloride Ion in Water (ASTM D 512-89 (Reapproved 1994) | |
| 405-92 | Standard Test Methods for Of of Water (ASTM D 1293-84) | |
| 406-79 | Test Method for Compressive Strength of Mortar for Use in Evaluating Water for Mixing Concrete | |
| 407-93 | Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits (ASTM D 932-85 (Reapproved 1990)) | |
| 408-93 | Standard Test Methods for Sulfate Ion in Water (ASTM D 516-90) | |
| 409- | Withdrawn | |
| 410-97 | Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction (ASTM C 570-95) | |
| 411- | Withdrawn | |
| 412- | Withdrawn | |
| 500-96 | Standard Practice for Use in the Evaluation of Testing and Inspection Agencies as Used in Construction (ASTM E 329-93b) | |
| 501-96 | Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement (ASTM A 615/A 615M-94) | |
| 502-96 | Standard Specifications for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (ASTM A 616/A 616M-93) | |
| 503-96 | Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete (ASTM A 416-94) | |
| 504-93 | Standard Specification for Steel Fibers for Fiber Reinforced Concrete (ASTM A 820-90) | |
| 505-96 | Standard Specification for Calcium Chloride (ASTM D 98-93) | |
| 506- | Withdrawn | |
| 507- | Withdrawn | |
| 508-93 | Standard Specification for Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) (ASTM D 1751-83 (Reapproved 1991)) | |
| 509-93 | Standard Specifications for Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction (ASTM D 1752-84 (Reapproved 1992)) | |
| 510-96 | Standard Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement (ASTM A 185-94) | |
| 511-96 | Standard Methods of Testing Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) (ASTM D 545-84 (Reapproved 1993)) | |
| 512-94 | Standard Practices for Force Verification of Testing Machines (ASTM E 4-94) | |
| 513-74 | Corps of Engineers Specifications for Rubber Waterstops | |
| 514-92 | Concrete Plant Standards - Ninth Revision | |
| 515-81 | Method of Preparation of Test Specimens from Rubber or Plastic Waterstop | |
| 516-71 | Method of lest for Verification of Compression Testing Machines Using Calibrated Proving Rings | |
| 517-71 | Method of Test for Verifying Machines for Use in Flexural Strength Tests of Concrete Mattresses | |
| 518-94 | Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (ASTM C 796-87a (Reapproved 1993)) | |
| 519-93 | Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (ASTM A 617/A 617M-92) | |
| 520-96 | Standard Specifications for Steel Wire, Plain, for Concrete Reinforcement (ASTM A 82-94) | |
| 521-81 | Standard Test Method for Frequency and Amplitude of Vibrators for Concrete | |
| 522-88 | Standard Methods of Testing Joint Sealants, Cold-Applied, Non-Jet-Fuel-Resistant for Rigid and Flexible Pavements | |
| 523-93 | Standard Specifications for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete (ASTM A 421-91) | |
| 524-93 | Standard Specification for Steel Bars, Alloy, Standard Grades (ASTM A 322-91) | |
| 525-89 | Corps of Engineers Test Method for Evaluation of Hot-Applied Joint Sealants for Bubbling Due to Heating | |
| 526-92 | Federal Specification: Sealants, Joint, Two-Component, Jet-Fuel-Resistant, Cold-Applied for Portland Cement Concrete Pavement, (SS-S-200E with Amendment 1) | |
| 527-88 | Standard Specification for Joint Sealants., Cold-Applied, Non-Jet-Fuel-Resistant, for Rigid and Flexible Pavements | |
| 528-87 | Standard Specification for Concrete Joint Sealer, Cold-Application Type (ASTM D 1850-74 (Reapproved 1979)) | |
| 529-92 | Federal Specification, Sealants, Joint, Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Tar Concrete Pavements, (SS-S-1614A with Notice 1) | |
| 530-92 | Federal Specification, Sealant, Joint, Non-Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Asphalt Concrete Pavements, (SS-S-1401C with Notice 1) | |
| 531-92 | Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements (ASTM D 2628-91) | |
| 532-96 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements (ASTM D 2835-89 (Reapproved 1993)) | |
| 533-96 | Standard Test Method for Rubber Property-Effect of Liquids (ASTM D 471-95) | |
| 534-93 | Standard Test Method for Rubber Deterioration-Surface Cracking (ASTM D 518-86 (Reapproved 1991)) | |
| 535-96 | Standard Test Method for Rubber-Deterioration in an Air Oven (ASTM D 573-88 (Reapproved 1994)) | |
| 536-93 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber (ASTM D 1149-91) | |
| 537-96 | Standard Specification for Steel Welded Wire Fabric. Deformed. for Concrete Reinforcement (ASTM A 497-94a) | |
| 538-93 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails (ASTM A 499-89) | |
| 539-93 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties (ASTM A 675/A 675M-90a) | |
| 540-01 | Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type | |
| 541-88 | Interim Federal Specification, Sealing Compound, Elastomeric Type, Single Component (for Calking, Sealing, and Glazing in Buildings and Other Structures), TT-S-00230c with Amendment-2 | |
| 542-79 | Interim Federal Specification, Sealing Compound; Silicone Rubber Base (for Calking, Sealing, and Glazing in Buildings and Other Structures) (TT-S-001543A) | |
| 543-79 | Interim Federal Specification, Sealing Compound-Single Component, Butyl Rubber Based, Solvent Release Type (for Buildings and Other Types of Construction) (TT-S-001657) | |
| 544-92 | Federal Specification: Insulation, Blankets, Thermal (Mineral Fiber, Industrial Type) ([Inch-Pound] HH-I-558C) | |
| 545- | Withdrawn | |
| 546-96 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar (ASTM: B 152-94) | |
| 547-88 | Standard Methods of Testing for Jet-Fuel and Heat Resistance of Preformed Polychloroprene Elastomeric Joint Seals for Rigid Pavements | |
| 548-88 | Standard Specification for Jet-Fuel and Heat-Resistant Preformed Polychloroprene Elastomeric Joint Seals for Rigid Pavements | |
| 549-96 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material (ASTM C 509-94) | |
| 550-96 | Standard Test Methods for Determination of Relative Viscosity, Melting Point, and Moisture Content of Polyamide (PA) (ASTM D 789-94) | |
| 551-96 | Standard Specification for Concrete Joint Sealer, Hot-Poured Elastic Type (ASTM D 1190-94) | |
| 552-96 | Standard Specification for Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements (ASTM D 3405-94) | |
| 553-97 | Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation (ASTM C 1077-96) | |
| 554-96 | Standard Specification for Elastomeric Joint Sealants (ASTM C 920-94) | |
| 555-96 | Standard Test Methods for Water Vapor Transmission of Materials (ASTM E 96-95) | |
| 556- | Withdrawn | |
| 557- | Withdrawn | |
| 558- | Withdrawn | |
| 559- | Withdrawn | |
| 560- | Withdrawn | |
| 561- | Withdrawn | |
| 562-93 | Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement (ASTM A 184/184M-90) | |
| 563- | Withdrawn | |
| 564- | Withdrawn | |
| 565- | Withdrawn | |
| 566- | Withdrawn | |
| 567-96 | Standard Practice for Rubber - Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets (ASTM D 3182-89 (1994)) | |
| 568-93 | Standard Practice for Rubber - Preparation of Pieces for Test Purposes from Products (ASTM D 3183-84 (Reapproved 1992)) | |
| 569-93 | Standard Test Method for Rubber Property Durometer Hardness (ASTM D 2240-91) | |
| 570-89 | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact (ASTM D 746-79 (Reapproved 1987)) | |
| 571-96 | Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (ASTM D 747-93) | |
| 572-74 | Corps of Engineers Specifications for Polyvinylchloride Waterstops | |
| 573-96 | Standard Test Methods for Rubber Properties in Tension (ASTM D 412-92) | |
| 574- | Withdrawn | |
| 575-74 | Method of Test for Change in Weight of Rubber on Immersion in Water | |
| 576-96 | Standard Test Methods for Rubber Property - Compression Set (ASTM D 395-89 (Reapproved 1994)) | |
| 577-96 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen (ASTM D 572-88 (Reapproved 1994)) | |
| 578-91 | Standard Test Methods for Collection of a Gross Sample of Coal (ASTM D 2234-89") | |
| 579-93 | Standard Practice for Probability Sampling of Materials (ASTM E 105-58 (Reapproved 1989)) | |
| 580-91 | Standard Practice for Choice of Sample Size to Estimate a Measure of the Quality for a Lot or Process (ASTM E 122-89) | |
| 581-93 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling (ASTM E 141-91) | |
| 582-91 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods (ASTM E 177-90a) | |
| 583-97 | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials (ASTM C 670-95) | |
| 584-91 | Standard Test Method for Water Absorption of Plastics (ASTM D 570-81 (Reapproved 1988)) | |
| 585-93 | Standard Test Methods for Nonvolatile Content of Resin Solutions (ASTM D 1259-85 (Reapproved 1990)) | |
| 586-96 | Standard Test Method for Epoxy Content of Epoxy Resins (ASTM D 1652-90) | |
| 587-89A | Standard Test Method for Viscosity of Epoxy Resins and Related Components (ASTM D 2393-86) | |
| 588- | Withdrawn | |
| 589-92 | Standard Specification for Latex Agents for Bonding Fresh to Hardened Concrete (ASTM C 1059-91) | |
| 590- | Withdrawn | |
| 591- | Withdrawn | |
| 592-93 | Standard Test Methods for Moisture-Density Relations of Soil-Cement Mixtures (ASTM D 558-82 (Reapproved 1990)) | |
| 593-91 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (ASTM D 559-89) | |
| 594-91 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures (ASTM D 560-89) | |
| 595-91 | Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete (ASTM C 881-90) | |
| 596-92 | Standard Test Method for Bond Strength of Epoxy-Resin Systems Used with Concrete (ASTM C 882-91) | |
| 597-91 | Standard Test Method for Effective Shrinkage of Epoxy-Resin Systems Used with Concrete (ASTM C 883-89) | |
| 598-94 | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay (ASTM C 884-92) | |
| 599-92 | Standard Test Method for Bond Strength of Latex Systems Used with Concrete (ASTM C 1042-91) | |
| 600-93 | Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout (ASTM C 1090-92) | |
| 601-96 | Standard Methods of Sampling and Testing Concrete Masonry Units (ASTM C 140-94a) | |
| 602-93 | Standard Specification for Aggregate for Masonry Mortar (ASTM C 144-91) | |
| 603- | Withdrawn | |
| 604- | Withdrawn | |
| 605-96 | Standard Specification for Concrete Building Brick (ASTM C 55-94a) | |
| 606-96 | Standard Specification for Load-Bearing Concrete Masonry Units (ASTM C 90-94b) | |
| 607-96 | Standard Specifications for Non-Load-Bearing Concrete Masonry Units (ASTM C 129-94a) | |
| 608-89 | Withdrawn | |
| 609-96 | Standard Test Methods of Sampling and Testing Brick and Structural Clay Tile (ASTM C 67-94) | |
| 610- | Withdrawn | |
| 611-94 | Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) (ASTM C 939-94a) | |
| 612-91 | Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory (ASTM C 941-90) | |
| 613-91 | Standard Test Method for Expansion and Bleeding Grouts for Preplaced-Aggregate Concrete of Freshly Mixed in the Laboratory (ASTM C 940-89) | |
| 614-94 | Standard Test Method for Time of Setting of Grouts for Pre-placed-Aggregate Concrete in the Laboratory (ASTM C 953-87 (Reapproved 1992) | |
| 615-93 | Standard Practice for Proportioning Grout Mixtures for Pre-placed-Aggregate Concrete (ASTM C 938-80 (Reapproved 1991)) | |
| 616-93 | Standard Test Method for Compressive Strength of Grouts for Preplaced- Aggregate Concrete in the Laboratory (ASTM C 942-86 (Reapproved 1991)) | |
| 617-97 | Standard Specification for Masonry Cement (ASTM C 91-95c) | |
| 618-96 | Standard Specification for Mortar for Unit Masonry (ASTM C 270-94) | |
| 619-92 | Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete (ASTM C 937-80 (Reapproved 1991)) | |
| 620-80 | Standard Method of Sampling Fresh Grout | |
| 621-93 | Standard Specification for Packaged, Dry, Hydraulic-Cement Grout (Nonshrink) (ASTM C 1107-91a) | |
| 622-93 | Standard Specification for Hydrated Lime for Masonry Purposes (ASTM C 207-91 (Reapproved 1992)) | |
| 623-97 | Standard Specification for Application of Portland Cement-Based Plaster (ASTM C 926-95a) | |
| 624-96 | Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels (ASTM C 1140-89 (Reapproved 1994)) | |
| 625-97 | Standard Specification for Admixtures for Shotcrete (ASTM C 1141-95) | |
| 626-92 | Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete (ASTM C 876-91) | |
| 627-97 | Standard Specification for Fiber-Reinforced Concrete and Shotcrete (ASTM C 1116-95) | |
| 628-93 | Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding (ASTM D 4580-86 (Reapproved 1992)) | |
| 629-96 | Standard Test Methods for Measuring Adhesion by Tape Test (ASTM D 3359-93) | |
| 630-96 | Standard Test Method for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means (ASTM D 4138-94) | |
| 631-93 | Standard Practice for Surface Cleaning Concrete for Coating ASTM D 4258-83 (Reapproved 1992)) | |
| 632-93 | Standard Practice for Abrading Concrete (ASTM D 4259-88 (Reapproved 1992)) | |
| 633-93 | Standard Practice for Acid Etching Concrete (ASTM D 4260-88 (Reapproved 1992)) | |
| 634-96 | Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating (ASTM D 4261-83 (Reapproved 1993)) | |
| 635-96 | Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces (ASTM D 4262-83 (Reapproved 1993)) | |
| 636-96 | Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method (ASTM D 4263-83 (Reapproved 1993)) | |
| 637-91 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages (ASTM D 4414-84 (Reapproved 1990)) | |
| 638-96 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers (ASTM D 4541-93) | |
| 639-94 | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials (ASTM C 802-94) | |
| 640-96 | Standard Method of Sampling and Testing Grout (ASTM C 1019-89a (Reapproved 1993)) | |
| 641-92 | Standard Test Method for Determining Floor Flatness and Levelness using the E-Number System (ASTM E 1155-87) | |
| 642-92 | Standard Test Method for Splitting Tensile Strength of Masonry Units (ASTM C 1006-84) | |
| 643-01 | Standard Test Methods for Compressive Strength of Masonry Prisms | |
| 644-92 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks (ASTM D 1985-91) | |
| 645-93 | Standard Test Method for Viscosity of Adhesives (ASTM D 1084-88) | |
| 646-93 | Withdrawn | |
| 647-96 | Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (ASTM D 4318-93) | |
| 648-94A | Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration (ASTM C 1202-94) | |
| 649-95 | Standard Test Method for Unit Weight, Marshall Stability, and Flow of Bituminous Mixtures | |
| 650-95 | Standard Test Method for Density and Percent Voids in Compacted Bituminous Paving Mixtures | |
| 651-95 | Standard Gyratory Testing Machine Method for Design of Hot-Mix Bituminous Pavement Mixtures | |
| 652-95 | Standard Test Method for Measurement of Reduction in Marshall Stability of Bituminous Mixtures Caused by Immersion in Water | |
| 653-95 | Standard Test Method for Determination of Moisture-Density Relation of Soils | |
| 654-95 | Standard Test Method for Determining the California Bearing Ratio of Soils | |
| 655-95 | Standard Test Method for Determining the Modulus of Soil Reaction | |
| 656-95 | Standard Test Method for Determining the California Bearing Ratio and for Sampling Pavement by the Small-Aperture Procedure | |
| 657-96 | Standard Practice for Conducting a Ruggedness or Screening Program for Test Methods for Construction Materials (ASTM C 1067-87 (Reapproved 1993)) | |
| 658-95 | Standard Test Method for The Break-Off Number of Concrete ASTM C 1150-90) | |
| 659-96 | Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test) (ASTM C 1245-93) | |
| 660-96 | Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table (ASTM C 1170-91) | |
| 661-06 | Specification for Antiwashout Admixtures for Concrete | |
| 662-09 | Standard Test Method for use of Lithium to Mitigate ASR | |
|
U.S. Army Engineer Research and
Development Center | ||
|
CONTACT: Director, Materials Testing Center | ||
|
Last Update: 17 Feb 2009 | ||